WHEELS

Wheels

I BUILD WIRE SPOKED WHEELS

Whether it’s restoring the wheels on your classic, repairing damage or building something bespoke.

I can build the wheels for you once you have refinished the hubs yourself using your supplied parts or I can refurbish your hubs and rims by Painting, Powder coating, Cerakote or Polishing them. I can supply stainless or galvanised, single gauge, single or double butted spokes and a wide range of rims.

If you are going to dismantle your wheels yourself to refurbish them it is important that you take a few simple measurements first. It is important to ensure these measurements are accurate as your wheels will be built using these, alternatively bring me your wheels before dismantling so that I can take these measurements.

How To Measure Rim Offset

How to measure rim offset

Vernier Calliper measuring width of a wheel

Step 1

Lay your wheel on a flat surface with the brake side of the hub facing upwards if twin discs please note which side the measurement is taken from.

Step 2

Lay a straight edge across the surface of the hub and measure down to the outside edge of the rim.

Step 3

If the rim is higher than the hub ensure the straight edge lays across both sides of the rim and measure the gap between the straight edge and the hub.

Step 4

Take the measurement in at least three different places.

Step 5

Measure the outer width of the rim.

Step 6

Save one inner and one outer spoke from each side of the wheel, if they have to be cut use as fine a blade as possible and just tape both pieces together, mark which spoke comes from which location.

Products

Can’t find what you’re looking for?
Request A Call Back

WHEELS

Wheels

Products

My Services

Contact Me